Xhorse Multi Prog Multi-Prog Programmer ECU Gearbox Programmer Update Version of VVDI Prog with Free MQB48 License
Package List:
1pc x power cable
1pc x MCU DB15 cable
1pc x USB cable
1pc x Main unit + VH13 adapter
1pc x Power adapter
1pc x MCU cable
1pc x ECU cable
1pc x VH24 interface adapter board
1pc x VH20 interface adapter board
1pc x OBD cable
1pc x ECU DB15 cable
5pcs x ECU harness plug replacement parts
Xhorse Multi Prog Feature:
1.Update version of VVDI Prog programmer
2. Free software and firmware update timely.
3. Read, Write and Clone ECU
4. Read, Write and Clone Gearbox TCU
5. Read EEPROM, ECU, MCU
6. Get free BMW ISN read function and NEC, MPC, Infineon etc chip continously update service
Other Features:
Support R&W lots of chips, include MC9S08 series, MC68HC(9)12series, MC9S12series, V850series, H8Xseries, R8Cseries, PCF79XXseries and most eeprom chips etc .
Support chip data verify, checkblank function
Support data file compare function
Free Pin code calculation service by Dump for various models
Support Read and Write BMW N20, N55 ECU (show ISN directly)
Stable Read and Write MC9S12XE series chips (5M48H/ 1N35H/ 2M53J/ 3M25J etc.)
Support renew PCF79XX remote, currently support BMW E/F series (Please Note PCF79XX adapter is optional)
Has the largest database of connection diagram
Reserve Ports: For future update
Xhorse Multi-Prog Programmer
Pro-level ECU TCU Programmer Update Version of VVDI Prog
Xhorse MULTI-PROG Pro-level programmer is a reading and writing
device for automotive chips, electronic modules, especially ECU modules. It
integrates the programming, reading, writing and cloning functions of common
automotive MCUs, automotive memory chips, common electronic modules and
automotive ECU boards.
Multi-PROG Pro-level programmer supports batch writing of chips, and
batch writing of chips is often used in factories when production requires
large-scale writing of chips. The types of writes supported are common memory
series and common microcontroller series. For the specific usage of batch
writing, please refer to the documentation of the factory usage mode that comes
with the software.
Batch programming function: Multi-PROG devices support factory usage mode
for batch programming of chips. In this mode, the functions of batch
programming, offline programming, and file offline programming can be
realized. The main difference between Xhorse VVDI PROG programmer and
Xhorse MULTI-PROG Pro-level programmer is that MULTI-PROG
Pro-level programmer has the batch programming function but VVDI
PROG programmer does not.
Highlights:
1. Fully Replace VVDI Prog:
Multi-Prog support factory usage mode for batch programming of chips. In
this mode, the functions of batch programming, offline programming, and file
offline programming can be done easily.
The main difference between VVDI PROG and Multi-Prog: Multi-Prog has the
batch programming function but VVDI PROG programmer doesn't.
2. With Free MQB48 License
and BMW Ben Read ISN.
Bind with Xhorse VVDI2/ Key Tool Plus PAD account, then your VVDI2/Key Tool
Plus PAD can use MQB48 Function too
3. Add Vehicle Engine Data
Calculation and Processing (MED17, EDC17 etc)
4. Support Checksum Function
5. Newest Software Version: V1.0.9, Hardware Version: V1.1.5
Xhorse Multi-Prog Functions:
1. Read, Write and Clone ECU
BMW B48/B58 reading ISN
BMW MSD80/81 /85/87/MSV90
Mercedes-Benz SIM271
BMW MSV80
VW BOSCH MED17 Series ECU
BMW N13/N20/N55/B38/TC17X
Support Marelli, Siemens, Delphi and other ECU manufacturers
With Free MQB48
License. Bind Multi-prog and VVDI2 full version to the
same Xhorse app account to use MQB48 NEC35XX function
Also Compatiable with Xhorse MQB
Solder-free Adapters
2. Read, Write and Clone
TCU
Volkswagen Audi Skoda DQ200, DQ250, VL381 TCU etc.
Porsche DL501 TCU
Ford Dodge and other MPS6 series TCU
BMW DKG, Mercedes-Benz VCS and other models TCU
3. Vehicle Engine Data
Calculation and Processing
MEDl 7/EDC17 data processing
4. Support Flexible Extension
of Third-party Plug-ins
Support the development of third-party plug-ins and provide data processing and
modification services
5. Read & Write MCU
Support reading and writing MCU of various brands including Renesas, Motolora,
NXP, Infineon, etc.
Support certain encrypted chip reading and writing
6. Read & Write Vehicle
Immo Module
Support Porsche, Land Rover, Mercedes-Benz EZS, VOLVO,
VW MQB dashboard, AUDI BCM2, etc.
Support modules including BMW EWS, CAS1 \CAS2\CAS3\CAS4+, FEM BDC, etc.
Support other common immo modules
Note:Compatible with Xhorse solder-free adapters and cables
7. Read & Write EEPROM
Support EEPROM and FLASH
8. Read & Write
Vehicle Dashboard
Support dashboard of VW, Honda, Hyundai, Kia, etc.
Product Specifications:
Operating system: Linux
Processor: ZYNQ7020 Dual-core Cortex A9 +FPGA
Memory: 256M* 2 DDR+64M NOR FLASH
Display: 3.5-inch
Input voltage: 15V/4A
Working current: 300mA(14V)
Working temperatures: -20-50℃
Storage temperatures: -30-65℃
External interface: USB/RJ45
Dimensions: 233*150*54mm
Package Includes:
1pc x Multi-PROG
1pc x USB Cable
1pc x Power Adapter (15V 4A)
1pc x 220V Power Cord
1pc x VH13 Interface Adapter Board
1pc x VH20 Interface Adapter Board
1pc x VH23 Interface Adapter Board
1pc x MCU Adapter Multi-PROG Solder Cable
1pc x ECU Adapter Multi-PROG Solder Cable
1pc x MCU DB15 Adapter Cable
43pcs x ECU Cable Plugs
1pc x ECU DB15 Adapter Cable
1pc x Multi-PROG OBD Cable
1pc x USB WIFI Network Card
1pc x Product Manual
1pc x Certificate Of Conformity
Shop
Customer Reviews